- Make sure this fits by entering your model number.
- Universal for Fiber Types: Same converter (extender) supports Multimode Fiber with distance 1 km (0.62 miles) and Single Mode Fiber with distance up to 20 km (11.42 miles), laser wavelength 1300/1310 nm, dual fiber. (HDTVI, HDTVI, HDAHD, No Loss, No Delay Fiber Optic Transmission)
- Universal Standards Supported: HD AHD TVI CVI CVBS 960H NTSC SECAM- All-in-One device;
- Maximum Resolution up to 2 Mpx, HD 1080p (960p / 720p also supported) and backwards compatible with CIF,D1 and 960H
- Full Set Includes Transmitter, Receiver & AC Power Supply, User Manual, Operating Temperature from -10℃ to 60℃;
- Plug & Play and Simple to Install – No Setup or Configuration is needed, SC connector for Fiber Optical Port, BNC connector for Video Port.
Looking for a device to extend your AHD / HD-TVI / HD-CVI, PAL, NTSC and SECAM CCTV camera systems over an optic fiber?
Then look no further – ADnet’s AN-AHDCT1001 series Fiber (Converter) extender set offer easy, affordable and Plug-n-Play solution for extending HD AHD TVI CVI CVBS 960H NTSC SECAM based cameras signal over distances up to 1 km (0.62 miles) using Multimode Fiber, and up to 20 (11.42 miles) km using Single Mode type fiber.
Simply plug in fiber optic cable using SC connectors at one side, and BNC connectors to your camera at Transmitter side and DVR or Monitor at Rx side, and units will be up and working immediately.
Since signal is directly sent over the fiber, there is no any delay to video signal introduced at all – you’ll have real, live signal transmission at receiver side.
In doubt will they work with your particular camera?
Contact us at any time & send us your camera model name and specifications for free consulting!
IMPORTANT!: Converters DO NOT support so called UTC technology (Up The Coax, meaning that Video + PTZ Data signal is sent over same BNC port) for PTZ!. Use for Video ONLY
IMPORTANT!: Maximum supported resolution for this model is up to 2MPX , 1080P!
Specifications:
- Transmission Wavelength: 1310 nm
- Fiber Type: 50/125u multi-mode, 62.5/125u multi-mode，9/125u single mode
- Optical Port Type: SC
- Dimensions: 12.40cm x 10.50cm x 2.90cm / 4.88in x 4.13in x 1.14in
- Input Power: 5VDC – 100 – 240 AC Universal Adapter Comes In Set
- Video Input Connector: BNC
- Operating Temperature: -10℃～+60℃